This product is classified as Dangerous Goods

It can NOT be shipped via Australia Post and can ONLY be sent to a street address.

Overview

Alclad II Lacquer has quickly become the preferred choice of many modellers for Natural Metal Finishes. The quality of Alclad II has led to its diverse use including achitectural models, custom built motorcycles, Hollywood special effects, angling accessories. For use on injection plastic kits a primer is necessary. ...Regular Alclad... is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which Alclad can craze. High-Shine Alclad finishes require a glossy base coat. Preparation and Spraying The surfaces to be painted must be thoroughly clean and free from dust,grease,oil and finger marks. Apply the correct primer for the type of Alclad being used. Alclad should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner. Buffing is not necessary-tonal variation can be made by polishing selected panels with Micromesh. Alclad Holomatic Spectral Chrome should be applied over Alclad Gloss Black Base. Apply 1-2 light coats. When completely dry finish with 2-3 coats of Water Based Clear. Application Guide for Lexan/Polycarbonate Body Shells: Apply 2-3 light coats of Prismatic or Holomatic Spectral Chrome to the inside of a clean body shell. Allow to dry thoroughly then back with black or silver Water Based Paint.