Zero Z1400 3 Axis Brushless Gimbal Gh3/4 (Zu-Z1400).

    
Features

Professional Brushless Gimbal for Aerial Photography
    Designed and developed alongside the Z2000 (5D) gimbal, a lightweight brushless gimbal, the Z1400 has been introduced by Zero Uav at the same time and is designed around the excellent "EVIL" equipped camera, the Panasonic GH3/4. The Z1400 uses the same precise gimbal control algorithm as the Z2000 and is also compatible with the YS series of autopilots bringing you not only safe operation but super smooth stabilised video and pin sharp still photos.
Direct Drive Motors with High Precision IMU Built in
    The Z1400 is a fully professional motorized gimbal with excellent performance. The IMU (Inertial Measurement Unit) module has built-in high-precision gyros and accelerometers to accurately stabilize the camera’s attitude and movement. Even in heavy wind, harsh conditions or in high-speed flight, stability and control of the camera will be maintained with the highest precision.
Various Platforms and Handheld Shooting Supported
    By extra Z-attitude unit, the gimbal can be operated independently. No matter applied to the multiple platforms such as car, boat, helicopter etc. , or to take hanheld shooting from the ground, the gimbal is quite simple to be used to meet different photography requirements.
SD Card Is Easy to Be Inserted and Extracted
    SD card can be directly inserted and extracted without dismantling gimbal which is quite convenient for customers in practical outdoor shooting.
Multiple Lens Changing Supported
    Z1400 is specially designed for the Panasonic GH3 EVIL (Electronic Viewfinder Interchangeable Lens) camera to ensure the highest photographic quality output. This camera supports multiple lenses, such as the Lumix G 14mm f/2.5, the LUMIX G 20mm/F1.7 and the Panasonic LEICA 25/1.4. All these lenses are supported and are freely interchangeable.
100% Compatibility with the YS Autopilot

In order to get high-precision attitude correction, Z1400 gimbal works in harmony with the YS-X4-P professional or GEMINI flight controller. The autopilot sends real-time attitude data to the gimbal allowing it to fine-tune the stabilisation process and bring you an awesome flying experience.
Different Oriention Modes Supported

Except for free controlling in the 3-axis angle, the orientation of Z1400 can be controlled by transmitter acccording to the real needs, which may meet the different shooting requirements in the aerial advertising or photography.
Controlled Three Axis Rotation Speed, 360° Continuous Rotation
    The Z1400 gimbal system has a creatively design mechanical structure and each axis can rotate indefinitely without limitation, eliminating the possibility of twisted wires and consequent failure. The stabilized range in the yaw, pitch and roll directions is a continuous ±360° rotation. In all three axis directions the excellent control algorithm ensures the highest precision possible.
Direct Drive Motors with High Precision IMU Built in
    The Z1400 is a fully professional motorized gimbal with excellent performance. The IMU (Inertial Measurement Unit) module has built-in high-precision gyros and accelerometers to accurately stabilize the camera’s attitude and movement. Even in heavy wind, harsh conditions or in high-speed flight, stability and control of the camera will be maintained with the highest precision.
S-BUS & Common Radio System Supported
    Currently the unit only supports Futaba S-BUS receiver control, it is possible however to purchase a PWM to SBUS switch module to use any common transmitter and receiver. Setup is quick and easy.
Controlled Three Axis Rotation Speeds
    The Zero Z1400 Gimbal 3-axis rotation control function is easy to apply. An excellent control algorithm ensures it has the highest precision rotational performance in the yaw, pitch and roll axes. Even if the aircraft is engaged in high speed rotation or climb maneuvers, the gimbal rotation speed is unaffected.
Excellent Performance in Conjunction with the E1100/HighOne Copter

The E1100 is a professional Octo and HighOne is the professional Quad aircraft specially designed for use in commercial photography and by leading hobby enthusiasts.They have enhanced safety, high stability, heavy load performance and, as it is integrated with the light weight Z1400 gimbal, it has long flight endurance.

gimble dose not include camera