• Word's First FOC brushless system for Rock Crawler. Field-Oriented Control for Super Linearity & High Torque & Extreme Silence.
  • The chip-type magnetic encoder inside the motor guarantees consistency between three phases’ signals and always outputs the pure and precise signals indicating the rotor position.
  • Polarity Protection: Yes. it is not a typo. No more "oops" moment. The chip-type magnetic encoder inside the motor guarantees consistency between three phases’ signals and always outputs the pure and precise signals indicating the rotor position.
  • The waterproof and dust-proof design (*IP67 standards) allows the AXE brushless power system to be used in all weather & track conditions without any issue of damage caused to the system from water or dust. Damage to the vehicle caused by water, mud, or conditions should be monitored closely when running in muddy, wet, or adverse conditions.
  • Intelligent torque output & speed closed-loop control for easy control, and consistent motor RPM under all loads.
  • The adjustable drag brake & drag brake rate control with the maximum drag brake of up to 200% (that’s near twice the drag brake of standard brushless power systems) can provide
  • unprecedented parking capacity on slopes, with no jerky stops.
  • The innovative built-in Bluetooth connectivity. allows users to read ESC data or update ESC firmware via a smartphone (installed with the HW LINK app).
  • The motor with 4 poles & 12 magnets, featuring Hobbywing’s “staggered pole” patent has zero cogging effect & torque ripple. It can work smoothly at low speeds. This greatly improves the manoeuvrability of rock crawlers at low speeds.
  • The new sensor harness, which features the plug-and-screw design, has a silicone O ring inside. The new design & O ring not only provide a firm connection between motor and ESC but solve the “waterproof” challenge for sensor ports.
  • The advanced and secure electronic switch features a waterproof, dust-proof, and shock-resistant design.
  • Multiple protections: low-voltage cutoff, thermal, fail-safe (throttle signal loss), motor lock-up, and overcurrent.

Note

Xerun AXE series is a closed-system: Due to its advanced technology, HOBBYWING Xerun AXE ESC works exclusively with Xerun AXE brushless motor.

p>


Specifications

ESC

  • Cont./Peak Current 80A/480A
  • Input Voltage 2-3S LiPo, 6-9S NiMh
  • BEC Output 6V/7.4V Switchable, Continuous Current of 6A (Switch-mode)
  • Input wires Red-Black-12AWG-200mm
  • Input connector XT60
  • Programming Port Built-in Bluetooth
  • Firmware iOS or Android smartphone (installed with the HW LINK app)
  • Size / Weight 47.4(L)x36.2(W)x26.5(H)mm/ 108g (Included input wires)

Motor

  • 1/10-1/8th FOC brushless motor (Patented)
  • Waterproof,
  • Motor Diameter: 36.0mm(1.42in)
  • Length (mm): 57.8mm(2.28in)
  • Shaft Diameter: 3.175(0.125in)
  • Pole: 4

Specifications

ESC (Electronic Speed Controller)
For Motor Type: Brushless
Max Voltage: 11.1
Continuous Amps: 80
Battery Connector: XT60
LiPo Cut-off: Yes
Programmable: Yes
Waterproof Design: Yes
Cooling Method: Air
BEC Voltage: 6v,7.2v
Dual Motor: No
Motor
Motor Type: Brushless
Can Length (mm): 57.8
Can Diameter (mm): 36
KV (RPM/V): 2300
Shaft Diameter (mm): 3.175 (1/8")

(HW38020505)

SKU HW38020505
Brand HOBBYWING

Be The First To Review This Product!

Help other Northern Beaches Hobby Centre users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category