Hobbywing Xerun XR10 Pro Elite G2S Brushless ESC 160A, 2s LiPo"
The XR10 Pro Elite G2S simply cuts a fine and light figure in all 1/10 competitions. Equipped with a 32-bit M4 microprocessor and various safety functions, the risk of damage to the vehicle's equipment is minimized. In addition, the controller is protected from overheating by a sophisticated cooling system. The copper heat sink on the power board reinforces this effect even more.

Stay cool and enjoy the ride with the new softening function, which, depending on Your personal setting, makes the driving experience perfectly adaptable to the driver. And when things get wilder, drivers of the XR10 Pro G2S can benefit from the maximized braking power, which is now an impressive 150%. With this ESC, You can't really go wrong.

Features:

Optimized cables (in contrast to the regular XR10 Pro G2S)
10 selectable profiles for all 1/10 RC car races
Internal long-life switch as well as the option to connect an external switch
Variable frequency control of the PWM and braking frequencies
Softening function for milder or wilder driving control and better driving efficiency
Various protective functions againstPolarity reversal
Overheating
Undervoltage shutdown
Loss of signal
Data logging of temperature, speed and much more.
Firmware upgrades possible
Technical Specifications:

Type: Brushless, Sensored
Current (cont./peak): 160A / 1200A
Input Voltage: 2S Lipo / 4-6 cells NiMH
BEC: 5V - 7.4V @ 5A (in 0.1V steps)
Motor Types: 3650 Brushless Motors with 2S LiPo/6S NiMH: (Touring Car) T >= 4.5T, (Buggy) T >= 5.5T
Fan: Yes, powered by BEC
Programming: LCD Programming Box, OTA Programmer
Dimensions: 37.5x30.9x32.5mm (without Fan or Fan Shrouds)
Weight: 88g (without cables)
Applications: 1/10 - 1/12

Optional Accessories:

LCD Programming Box
OTA Programmer